English SDS-derived summary. This is the supplied English warehouse/handling summary, not a complete manufacturer Safety Data Sheet. Use alongside the original manufacturer document and product label. Source revision: 02-02-2024. Website/PDF edition: 11 October 2026, version 1.
Check the edition date before use. The PDF download and this page carry matching content; consult ECOPROCORK for the current manufacturer safety document.
Document title: English SDS-derived warehouse submission summary
Product name: MEMBRANA DECOIMPER
Manufacturer: DECOPROYEC SUBERTRES S.L.U.
Source document basis: Manufacturer SDS headed “according to Commission Regulation (EU) 2020/878”, last update 02-02-2024.
1. Product identification
Commercial product name: MEMBRANA DECOIMPER
Pack format: 15-litre buckets
Manufacturer: DECOPROYEC SUBERTRES S.L.U.
Manufacturer address: Polígono Industrial Los Molinos, C/ Trilladores nº47, 02520 Chinchilla de Monte-Aragón, Albacete, Spain
REACH note: Exempt from REACH registration under Article 2(9)
CAS number: Not available
Identified uses: Refer to technical data sheet
Uses advised against: No use restrictions identified to the manufacturer’s knowledge.
2. Classification and hazard summary
According to the source SDS, this product is not classified as dangerous under Regulation (EC) No 1272/2008. The same sheet states there are no hazard pictograms, no signal word, and no hazard statements assigned.
Supplementary hazard information:
EUH208 — contains a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one (3:1) and may cause an allergic reaction.
Other hazard note:
The SDS states that the product is not considered PBT or vPvB under Annex XIII of Regulation (EC) No 1907/2006, and that there is no specific fire or explosion risk.
3. Composition summary
The SDS describes the product as a mixture formed by the specified substances with non-hazardous additions. No hazardous component table entries are populated in the visible source pages provided here.
4. First aid measures
Inhalation: Not specifically concerning; aqueous liquid.
Skin contact: Remove contaminated clothing and wash with plenty of soap and water.
Eye contact: Rinse immediately with plenty of water.
Ingestion: Seek medical attention without delay.
Main symptoms/effects: The SDS notes the product is slightly irritating to the eyes.
Medical note: Show the safety data sheet to medical personnel.
5. Fire-fighting measures
Suitable extinguishing media: Water spray, foam, dry powder, carbon dioxide.
Unsuitable extinguishing media: None stated.
Specific fire risk: The SDS describes it as an aqueous liquid that presents no risk in the event of fire.
Advice for fire-fighters: Do not intervene without suitable protective equipment.
6. Accidental release measures
Personal precautions: Use suitable protective gloves, eye protection and protective clothing.
Environmental precautions: Avoid release to the environment and prevent entry into drains and sewers.
Containment and clean-up: Mechanically collect or absorb with inert absorbent material, retain recovered product for disposal, and wash the affected area thoroughly with plenty of water.
7. Handling and storage
Handling: No specific technical measures are stated as necessary; follow normal industrial hygiene and safety practice.
Storage: Stable under normal storage conditions.
Incompatible materials: None known according to the SDS.
Recommended packaging materials: Coated steels, stainless steels, plastic (polyethylene).
Packaging materials to avoid: Aluminium and its alloys.
8. Exposure controls and personal protection
The SDS states that no specific or special precautions are required beyond normal health and safety practice.
Eye/face protection: Suitable eye protection.
Hand/skin/body protection: Suitable protective gloves and clothing.
Respiratory protection: Use suitable respiratory equipment where ventilation is insufficient.
9. Physical and chemical properties
Appearance: Liquid; colour according to product designation
Odour: Slight
pH: 8–9
Crystallisation point: -10°C
Boiling point: 100°C (water)
Flash point: >100°C (closed cup)
Density: 1.33–1.05 g/cm³ depending on colour
Water solubility: Soluble
Explosive properties: Product is not explosive
Oxidising properties: Product is not oxidising
Auto-ignition: Product is not self-igniting.
10. Warehouse handling note
For warehouse intake and storage purposes, this product should be treated as a non-classified aqueous membrane product supplied in 15-litre buckets, with routine controls for sealed storage, upright handling, spill prevention, and standard PPE during decanting or clean-up. The key caution retained from the source SDS is EUH208 allergen warning and the note that the product may be slightly irritating to eyes.
11. Submission note
This text is an English SDS-derived warehouse summary prepared from the manufacturer’s source SDS. It is intended for distribution, warehousing and product onboarding support and should sit alongside the original manufacturer SDS rather than replace it. The governing source in the uploaded file is the manufacturer SDS dated 02-02-2024.