ECOPROCORK® · Applicator resources

Prepare well.
Work with the right information.

Use these applicator resources as a practical starting point for system guidance, colours, training and technical support.

Ask for project-specific guidance

SLICS-C & SLICS-M practical guidance →

An instructor explains the layers of a demonstration wall around a window while a trainee watches

Useful starting points

Applicator resources for your next step.

Systems & applications

Understand SLICS™, TLICS™, SLICS-R™, ETICS, SLICS-C and SLICS-M, then discuss the complete build-up for the intended work.

System guide →

Colours & finishes

Explore the existing colour chart and agree a physical sample and availability before specifying a finish.

View colour chart →

Practical training

Start with the one-day course. Afterwards, choose an optional specialist area or focus.

We refund the training cost against your first £1,000 product order when no trade discount is applied. This offer is not combined with a trade discount.

Training details →

Common questions

Find clear answers about preparation, thermal improvement, moisture, approval and quotations.

Read the FAQs →

SLICS-C & SLICS-M · Practical project planning

Prepare for the environment.
Plan every layer.

Use these application checklists to prepare a useful technical enquiry and a clear scope of work. Follow the current instructions for the selected products and the agreed project specification when applying.

Completed coastal home in Barmouth from the ECOPROCORK project collection

SLICS-C · Coastal Protection

Cork-based exterior refurbishment for coastal properties and exposed frontages.

  1. Assess the wall. Record existing finishes, adhesion, cracking, damp, salts and exposure. Refer structural movement or uncertain defects for appropriate investigation.
  2. Agree the preparation. Confirm repairs, cleaning, compatible primers and whether the substrate needs a reinforced basecoat or coordinated insulation-board build-up.
  3. Approve a sample area. Establish colour, texture and adhesion on a representative prepared surface before wider application.
  4. Plan application conditions. Confirm the product grade, specified thickness, coat sequence, coverage and drying conditions. Plan access, masking and weather protection.
  5. Check and hand over. Record preparation and application checks, inspect junctions and finish, and agree maintenance and written warranty terms.
Applicator spraying cork onto overhead panels inside a barge conversion

SLICS-M · Marine Insulation

Internal cork insulation for boats and narrowboats, including assessed barge and houseboat conversions.

  1. Assess the interior. Identify hull or lining material, existing coatings, corrosion, moisture, access and the intended fit-out. Agree ventilation, isolation and safe-working arrangements with the vessel team.
  2. Confirm compatibility. Agree cleaning, salt removal, corrosion treatment and primers for the actual substrate. Confirm adhesion with representative trial areas.
  3. Set the application plan. Confirm product grade, total dry thickness, successive coats, drying and access around contours, framing and services.
  4. Inspect before lining. Check coverage and agreed details while the surfaces remain accessible. Coordinate additional insulation, ventilation, heating, fire requirements and lining with the competent designer or boatbuilder.
  5. Document the work. Keep product and batch records, application conditions, photographs and the agreed inspection and handover information.

The right documents, equipment and practical skills.

Match the material, preparation products, spray gun and compressor to the confirmed application. Review mixing, equipment setup, cleaning, maintenance and PPE with the Academy. Use the supplier's current safety information and the project risk assessment.

Sprayed-cork technical datasheet · Safety & handling documents · DECOPROYEC® sprayed cork · CP19 spray equipment · Request project-specific guidance

Read evidence in scope. Salt-spray testing concerns the documented specimens, not universal corrosion protection or service life. Reaction-to-fire evidence does not establish marine approval or classify every complete lining. Confirm current thermal design data and the whole wall or vessel build-up; no immersion suitability is asserted. Technology & Quality explains the evidence. These planning notes do not replace product instructions, a project method statement or competence assessment.

Before an unfamiliar application

Get the current guidance.
Confirm the full build-up.

Request preparation and substrate guidance, mixing instructions, coverage and thickness, drying conditions, detailing, maintenance and any relevant safety documents for the named products.

Request technical support

Make your request specific

  • Project location and building use.
  • Existing substrate, condition and known coatings.
  • Proposed system and product names.
  • Area, exposure, access and intended finish.
  • Photographs and details of the question or defect.

An article or video is not a substitute for the current instructions for the product and application.

Approved Applicator support

Present your work professionally.

Ask the team about current Approved Applicator branding, permitted logo use and available marketing assets. Confirm your approval status and the scope of use before publishing branded material.

For a case-study conversation, prepare the client’s permission, the location you may disclose, the problem, the agreed specification and clear before, during and after photographs. Keep measured outcomes separate from customer feedback.

Request branding or case-study support →

Build a stronger business

Optional support can explore positioning, local visibility, enquiries, quotations, follow-up and growth planning. Scope, availability and any fees are discussed separately.

Explore the professional journey →

Ready to order?

Continue to the existing product shop, with any project-specific material questions confirmed first.

Visit the shop

You can buy products without completing training. Purchases for untrained application are supplied without an ECOPROCORK system/application warranty. Your statutory rights are unaffected. Browse products.

DECO 00 FINO instructions Cork board datasheet and PDF Spray cork fire certificate and report