Technical-sheet-derived summary. This is the supplied English warehouse/handling summary, not a complete manufacturer Safety Data Sheet. Use alongside the original manufacturer document and product label. Source revision: Not stated in supplied summary. Website/PDF edition: 11 October 2026, version 1. This is a construction-product technical summary, not a chemical SDS. Source pack sizes below differ from the current shop pack options; supplier confirmation is required before ordering.
Check the edition date before use. The PDF download and this page carry matching content; consult ECOPROCORK for the current manufacturer safety document.
Document title: English technical-sheet-derived warehouse submission summary
Product name: PLACA DE CORCHO NATURAL / Natural Cork Board / Cork ETIC Panels
Manufacturer: DECOPROYEC SUBERTRES, S.L.
Source document basis: Manufacturer technical sheet titled “PLACA DE CORCHO NATURAL FICHA TÉCNICA”.
1. Product identification
Commercial product name: PLACA DE CORCHO NATURAL
English sales name: Natural Cork ETIC Panels / Natural Cork Board
Product type: Thermal and acoustic insulation board for walls, ceilings, roofs and ETICS/SATE systems
Manufacturer: DECOPROYEC SUBERTRES, S.L.
Manufacturer address: Polígono Industrial Los Molinos, C/ Trilladores nº47, Nave 4 y 5, Chinchilla de Monte-Aragón, Albacete, C.P. 02520, Spain.
2. Product description
The technical sheet describes this product as thermal and acoustic insulation for use in walls, ceilings, roofs, either inside cavities or as interior / exterior lining, and also in SATE / ETICS systems. It is described as:
natural and ecological
made from renewable raw material
dimensionally stable over time
free from solvent release or dangerous particles
rot-proof and not attacked by insects
vapour permeable, helping to prevent condensation
compression resistant
good for both thermal and acoustic insulation.
3. Technical characteristics
The technical sheet gives the following declared characteristics:
Standard board size
1000 x 500 mm (± 1 mm)
Available thicknesses
10, 20, 30, 40, 50 and 60 mm (± 1 mm)
Reaction to fire
Euroclass E to EN 13501-1
Compression resistance
5.2 kg/cm²
Thermal conductivity
λ = 0.049 W/mK
Density
300–400 kg/m³
220–320 kg/m³
(the sheet presents these values against the 10 mm and 60 mm examples shown)
Thermal resistance
0.204 m²·K/W
1.225 m²·K/W
(the sheet presents these values against the 10 mm and 60 mm examples shown)
Sound absorption coefficient
αw = 0.15 (Class E)
αw = 0.50 (Class D)
Water vapour permeability
0.002 – 0.006 g/m·h·mmHg.
4. Packing formats
The sheet gives the following pack and pallet quantities:
10 mm boards: packs of 10 m² (20 boards), 240 m² per pallet
20 mm boards: packs of 5 m² (10 boards), 120 m² per pallet
30 mm boards: packs of 4 m² (8 boards), 80 m² per pallet
40 mm boards: packs of 2.50 m² (5 boards), 60 m² per pallet
50 mm boards: packs of 2 m² (4 boards), 48 m² per pallet
60 mm boards: packs of 2 m² (4 boards), 40 m² per pallet.
5. Warehouse handling note
For warehouse onboarding, this product should be treated as an insulation board / construction product article, not as a liquid chemical product. Based on the technical sheet, the key warehouse considerations are:
dry, protected storage
protection from crushing and edge damage
stock control by thickness
palletised handling by pack size
clear identification of board thickness and quantity per pack
separation from moisture exposure during storage and transit.
The technical sheet also supports use in ETICS / SATE, so it is suitable to list within the system pack as the board insulation element of the ETIC offering.
6. Submission note
This text is an English technical-sheet-derived warehouse summary prepared from the manufacturer’s uploaded cork board technical sheet. It is suitable for UK warehousing, distribution onboarding and internal product handling review, and should sit alongside the original manufacturer technical sheet, not replace it.