Existing condition
Understand the wall or roof, existing coatings, defects, exposure and any moisture problem before choosing a material.
Spray cork & render comparison · ECOPROCORK®
Use this cork render comparison to explore how ECOPROCORK® SLICS™ compares with silicone, monocouche and sand-and-cement render. See the differences at a glance, then check the technical data for your project.

Define the brief first
A decorative finish is not the same as a whole-wall insulation upgrade. Equally, an insulation system must still be detailed and finished appropriately for the building.
Understand the wall or roof, existing coatings, defects, exposure and any moisture problem before choosing a material.
Set out the appearance, thermal objective, available space, maintenance expectations and project constraints.
Compare preparation, components, thickness, detailing, application, evidence and written warranty terms.
The spray-cork advantage
SLICS™ brings cork’s thermal properties, flexibility and a coloured finish together in a thin coating. See where it differs from conventional render options.
On smaller screens, swipe the matrix sideways to compare every option.
| What matters | ECOPROCORK® Spray cork SLICS™Decoproyec® cork coating | Silicone renderThin-coat system | Monocouche renderThrough-coloured cement | Sand & cement renderTraditional / premixed |
|---|---|---|---|---|
| Natural cork content | ✓Cork-based coatingRenewable cork ingredient | ×No cork aggregate | ×No cork aggregate | ×No cork aggregate |
| Thermal function of the finish | ✓Thermal cork coatingArchived sheet λ: 0.050 W/m·K¹; historical lab mean: 0.0588. Current grade to confirm. | ×Decorative topcoatInsulation is a separate layer | ×Decorative renderNot a dedicated insulation layer | ×Base renderNot a dedicated insulation layer |
| Low build-up | ✓Approx. 3 mm coating²On a suitable prepared surface | –Thin topcoatPlus the required basecoat | ×Typically 15–25 mmFinish and exposure dependent | ×Typically 16–20 mmExternal render, before decoration |
| Flexibility | ✓Elastic coating34.6% elongation at break¹ | ✓Flexible optionsCheck the selected system | –Cement-based renderMovement detailing matters | –Cement-based renderMovement detailing matters |
| Water-vapour permeability | ✓Vapour permeable¹ | ✓Vapour permeablewebersil TF example | –Check specificationProduct and build-up dependent | ✓Breathable renderweberend OCR example |
| Colour in the finish | ✓Coloured cork texture | ✓Coloured finish | ✓Through-coloured | ×Separate decorationPaint or decorative finish |
| Exterior weather protection | ✓Specified cork systemPreparation and detailing required | ✓Water-repellent finish | ✓Weather-resistant render | ✓Weather-resistant render |
| Lichen & moss observations | –Reported project observationsCase studies do not establish a universal tested resistance rating; confirm the exposure, maintenance and selected specification | –Check specificationConfirm for the selected product | –Check specificationConfirm for the selected product | –Check specificationConfirm for the selected product |
Thermal evidence update, 19 October 2026: AITEX 2013AN1713 reports 0.0588 W/(m·K), while the archived spray datasheet quotes 0.050. The annex thickness and resistance entries also need clarification. Neither is a confirmed current design value here. Read the figures, scope and original report. The complete wall or roof needs a project-specific calculation.
Why choose SLICS™? A cork-based, flexible finish with minimal added thickness—an option worth considering when refurbishing a suitable existing surface without a thick render build-up.
¹ Manufacturer-reported product properties, not whole-wall performance. A thin cork coating adds limited thermal resistance; it does not replace external or internal wall insulation or establish an energy-saving percentage. Flexibility does not make a coating crack-proof: existing cracks and defects must be repaired.
² Approximate coating thickness only; preparation, primers and any supporting layers depend on the project. All options require a sound, suitable substrate. Weather protection depends on the complete specification; the cork layer alone is not a roof waterproofing system. The coating contains cork, binder and other ingredients.
Specialist applications · SLICS-C & SLICS-M
Bring the cork approach to two very different environments. SLICS-C focuses on coastal building refurbishment. SLICS-M focuses on internal insulation for boats and narrowboats. Compare the benefits, then explore the products, application and evidence for your project.

A fresh cork-based finish for exposed frontages, with appearance, coastal exposure and maintenance considered together.
Explore SLICS-C Coastal Protection →
A compact spray-applied cork layer for suitable internal boat surfaces, following accessible curves and framing as part of the complete fit-out.
Explore SLICS-M Internal Boat Insulation →On smaller screens, swipe across the matrix to read every column.
| Your priority | SLICS-C · Coastal Protection | SLICS-M · Marine Insulation |
|---|---|---|
| Where it belongs | Coastal homes, hotels and other exposed building frontages. | Suitable internal surfaces in boats and narrowboats, including assessed barge and houseboat conversions. |
| What you want to achieve | Refresh coastal character and plan an appropriate exterior finish and care regime. | Bring cork into the insulation design while working around interior space and structural details. |
| System approach | Assessed wall, preparation and repairs, compatible supporting layers where needed, then specified sprayed cork. | Assessed internal substrate, compatible preparation and primers, specified successive cork coats, coordinated insulation and lining. |
| Start your project | Explore the coastal system | Explore internal boat insulation |
On smaller screens, swipe across the matrix to read every column.
| Feature | Benefit for your coastal property | How to specify it |
|---|---|---|
| Cork-based coloured finish | Refresh the appearance and texture of an exposed frontage. | Choose colour, texture and a representative sample area for the property. |
| Flexible application routes | Assess options from a sound existing surface through to reinforced basecoat or cork-board insulation. | Select the complete build-up for substrate condition, exposure and the thermal brief. |
| Coastal exposure considered | Bring salt-laden air, rain exposure, repairs and maintenance into one specification. | Use the scoped salt-spray evidence alongside the actual wall assessment and detailing. |
| Maintenance planned from the start | Consider future access, inspection and upkeep before work begins. | Agree care requirements and written product and installation warranty terms. |
| Products and practical skills | Explore spray cork products and equipment. | Get trained at the ECOPROCORK Academy. |
On smaller screens, swipe across the matrix to read every column.
| Feature | Benefit inside your boat or narrowboat | How to specify it |
|---|---|---|
| Spray-applied coverage | Follow accessible curves, panels and framing with less cutting and fitting around details. | Confirm preparation, primer, trial-area adhesion and coverage before closing the lining. |
| Compact cork layer | Preserve useful space around headroom, cupboards and services. | Agree the installed dry thickness and additional insulation needed for the complete fit-out. |
| Comfort-led fit-out | Consider cork within the insulation, moisture-control and acoustic-comfort design. | Coordinate ventilation, heating, moisture sources, insulation and lining; quantify performance only with applicable evidence. |
| Successive-coat application | Build the cork layer through a controlled application sequence. | Agree the selected product, coat thickness, drying conditions, access and inspection. |
| Equipment and training together | Explore DECOPROYEC sprayed cork and CP19 equipment. | Learn effective application at the Academy and discuss the specific vessel. |
Explore products and spray equipment, build practical application skills, then bring the right system to coastal properties or boat interiors.
Evidence follows the application. These are application routes, not interchangeable approvals. Historical salt-spray results concern tested specimens and do not establish service life, universal corrosion protection or immersion suitability. C-s1,d0 applies within the documented sprayed-cork test scope; it is not marine approval or classification of every complete lining. Obtain current grade-specific thermal data and assess the full wall or vessel build-up. A thin coating alone does not establish a U-value or guarantee condensation or acoustic outcomes. Read the datasheets, reports and evidence limits.
Check the exact specifications
Check the figures, application conditions and limitations for the product you are considering. These render examples support the comparison; individual products within each category vary.
Decoproyec® sprayed cork product data, hosted by ECOPROCORK.
PDF · V1
Download spray-cork data sheet ↗Weber webersil TF. Representative thin-coat finish.
PDF · Manufacturer data
Download silicone data sheet ↗Weber weberpral M. Representative through-coloured render.
PDF · Manufacturer data
Download monocouche data sheet ↗Weber weberend OCR. Premixed sand-and-cement example.
PDF · Manufacturer data
Download cement-render data sheet ↗PDFs open in a new tab for viewing or downloading. The spray-cork PDF is the published V1 document; confirm the applicable revision and full SLICS™ specification with ECOPROCORK before use. The manufacturer’s online product data is marked updated 24 January 2026. If documents differ, request written clarification for your application.
Evidence before claims
Ask the same questions of every proposed system so that the comparison remains useful and fair.
Technical informationYour next step
Share the property type, location, photographs and intended work. We can discuss the appropriate ECOPROCORK route and the evidence needed before a specification is agreed.
Manufacturer guidance explains the distinction between monocouche and silicone render systems and the components of an acrylic render system. The Energy Saving Trust explains internal and external solid-wall insulation. These references describe categories and examples; they do not certify an ECOPROCORK installation.
Guide reviewed October 2026. For ECOPROCORK product and system evidence, request the current documents for your proposed application.
Internal insulation: compare the full lining and insulation build-up, room-space impact, services and junctions. Explore internal wall insulation.
External insulation: compare the insulation layer, fixings, reinforcement, finish and details at openings, roofs and plinths. Explore external wall insulation.
Thin cork treatments: consider their specified surface role and limited thermal resistance alongside space constraints. Read the thin-wall guide. A thin finish is not a like-for-like replacement for a thicker insulation layer.
Solid and traditional walls: compare exposure, existing finishes, drying and the proposed complete construction. Solid-wall options · Breathable insulation explained.
View the wall build-up diagrams to compare the layers in internal and external wall systems.
Use the Insulation & Retrofit hub for the full planning route. Compare quotes against the same thermal objective, required repairs, installed scope and evidence. Do not infer universal bill savings or mould prevention from a material description.